Sunshine room is a more new-style concept that appears in contemporary household, actually sunshine pays more attention to recreational on the function. But as a result of this kind of functional area is located in sunshine more adequate, good ventilated area commonly, and when decorating, glass door window is used commonly make it to be able to look all round panoramic mode, because this name of sunshine room accords with its characteristic more. So in the end how to do the sun room decoration design, what details need to pay attention to?

1. Concealment points of infrastructure construction

Comprehensive planning on the basis of sun rooms is also important for another reason, and drainage systems (rainwater and condensation) should be built below ground level (to avoid frost damage). Power lines may be introduced into radiators that must have the same sun room plan.Upgrading later will only cost more.

2, moistureproof: prevent rising moisture

The bottom plate is provided with a rising moisture barrier waterproof film (e.g. asphalt). In order to prevent precipitation or cold condensation on the base plate, the lower part of the sun room is installed to prevent frost insulation maintenance is necessary, which depends on the construction environment of the sun room (the relationship between the floor and the bottom substrate in the sun room is analyzed as below, equal to or above), as well as the drainage capacity of the soil. Installation requires reliable heat break conditions, simple solutions can also achieve moisture - proof frost-free strip foundation.

3, basic support load sunshine room

For load-bearing and distributed on the ground floor is generally sufficient strength to strengthen the slab. The sun room's dead weight load is relatively low light structure. The floor structure must be strong enough to support the sun room, wind, record snow, and live loads (including structural installers).

4, thermal insulation

Terraces and rooftop sun rooms are the more we need to worry about heat insulation and condensation and rising humidity. However, weight, snow, wind load and base frost depth should receive equal attention. Frost and dew points on the edge of the sunroom are kept out at the same time. It must have insulation. The floor insulation board also includes a frost buffer area in the surrounding area of the sunroom. For the life of the sun room energy saving energy saving requirements of the maximum heat transfer coefficient of 0.3W /㎡K.

 Shandong Imagery Aluminum Technology Co.,Ltd